Verify that the Print Spooler service is running. This update will include two separate patches and each patch will require a separate installation. When the LCD is blank, go to Step 2. These codes are case sensitive. September 4 IP 5.

Uploader: Zolojas
Date Added: 14 May 2013
File Size: 24.15 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 37877
Price: Free* [*Free Regsitration Required]

It is very important that the syntax above is correct or the file will not be copied to the printer. The Dynamic Mode button, that lets you switch drivers, has been moved to the Property Screen so you can now switch drivers more easily, and only when necessary, making overall operation much more convenient.

Before copying the file, make sure that PageMaker is not open. Drivers Print Processors 7. Configuration requirements should be provided to the System Support Center for configuration and testing of the print server. Koniica on the ‘Save Settings’ button.

Thank you very much for purchasing the IP Very often, this rated speed will not coincide with the actual throughput observed during the printing of documents.

Corrupt printer driver on the server. Ensure that the NIC is at the latest firmware level. The Scan-to-Disk activity can be checked and the information saved to file for audit purposes. Select Manual radio button.


Konica Minolta IP Manuals

There are several options that may resolve this problem. When attempting ppcl scan multipage document, only two pages scan, the rest of the pages feed through the ADF feeder without scanning.

The [Show layout] lcl will change to the [Show single page] button by clicking it. When in doubt about the Printer EKC settings, ask your system administrator. If any of the processes do not take place, check the contents of the D: The next [Add Printer Wizard] window to assign a port will appear. Basic Troubleshooting Check the LCD touch screen of the main body printer to find information concerning the current trouble.

Konica Minolta IP-511 Driver

The printing system will determine on its own if ‘R’ oriented paper is required. At this point all jobs which are printed will have a print file saved in the spool directory.

Installation Of The Printer Driver When installing the printer driver, a screen may appear that asks the user to select whether the printer driver file file to be copied or a new file that exists in the computer is to be used.

Page 73 Position – Angle Control the lean angle of the watermark op sliding this control back and forth or by typing a number in the text value box from 0 degrees to degrees.

This setting is defined on a per printer port basis and defaults to 0, which il RFC compliant. To check the memory module, konida the following: Disable Autoconfigure, Bi-directional and plug-and-play settings. Reseat the IP onto the main body and verify operation 2. On the General tab, in the Startup type list, click Disabled.

Related Drivers  ZYXEL P-660W-TX SERIES DRIVER

Please visit the Konica FTP site for the most up-to-date version information. Using the left arrow, scroll until 22 konics displayed. If looking through the Konica Minolta IP user manual directly on this website is not convenient for you, there are two possible solutions:. De-select the collate option.

Both AppleTalk and Novell protocols are “chatty”. When upgrading the firmware of the IP, disable Norton Antivirus before proceeding with the flash upgrade.

When you select the function you would like to use from the upper list, the actual setting of the function you selected will be shown on the lower box. Reset the NIC to factory defaults. Check that the power switch of the copier is turned on.