If possible, perform test procedure. Do your pos terminals come with POS software preinstalled? The Customer Display is not Functing.. You may configure the IP address manually by clicking customized [C] and setup [E]. Follow the instructions to install the utility. The POS terminal will initiate the device detection and install the driver automitacilly after the keyboard is detected. Be sure to Turn-Off and Turn-On the printer again to initiate the printer with new codepage setting.
|Date Added:||18 December 2011|
|File Size:||25.67 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Incorrect port or code command set might be the reasons that your customer display can not function as your wish.
Access the application software. How can I configure the Code Page of the Receipt printer. Select the proper sub-menu by the connection type of the printer. It is highly recommended that you get the POS software which suits your needs locally mainly due to language and currency.
Enter the IP address of the printer to establish the communication. Enter the reserved IP Address and the name of your Printer. Perform Self-test to acquire the IP address of your printer 1.
TYSSO PRP250 PRP-250-GI-BW-U-3 POS DEVICES
Be sure to Turn-Off and Turn-On the printer again prp–250 initiate the printer with new codepage setting. If thereis no texts show on the display, check the power switch is turned on and the display is functioning.
Before Setup It may need to re-configure the printer prior to the codepage setup e. The Indicators would blink and then the printer starts printing out the self-test data, IP address is included as well.
POS System Manufacturer, Barcode Scanner, POS Terminal, POS Peripheral – Fametech Inc.
You can what suit you depending on the POS system you purchased. Check the power source.
Access Ethernet Test Program. Use the supplied Ethernet crossover cable to a direct cable connection to your POS terminal. The POS terminal will initiate the device detection and install the driver automitacilly after the keyboard is detected. Turn on the Power Switch of the printer. The Customer Display is not Functing. Please find the supplied disc for the latest software.
Select the proper COM port and baud rate to establish communication. Check the power cable of your customer display is properlly connected to the power source if you purchase an optional power adaptor.
There is a web-based configuration menu to re-configure your PRP If you find the Customer display is not functining, please follow the steps as follows: Then you can use your keyboard now. Connect your printer to your PC 3.
Now you can turn on the USB device again. Turn off the USB device. When connecting the printer to the Host PC, you can: USB type and RS Access the control panel of your Host PC. Plug the RJ Connecter to the printer. Please refer to the printed Self-Test page for the code number support.
Go to the scroll menu and the preset codepage desired.
Be sure to assign the IP address of the Host PC under the same subnet as your Printer Now you can turn on the printer and install the driver, perform the printing works. Now you can open the web browser and type the IP address of your PRP as listed in the self-test paper. Switch on the POS terminal and access the operating system.